Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 5 Oct 2000 16:52:48 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Jim,
One solution could be to place the local fiducials underneath the components. Another solution: don't use them.
And do you really need a 0.150 (inch ?) keep out area ?
Kind regards,
Daan Terstegge
SMT Centre
Signaal Communications
Unclassified mail
Personal Website: http://www.smtinfo.net
>>> Jim Kittel <[log in to unmask]> 10/05 3:25 pm >>>
TechNetters,
With so much emphasis on reducing circuit board feature sizes by use of
micro BGA's, micro lead frames, micro vias, etc. the use of local fiducials
becomes a real burden. For example, our typical fiducial is a 0.048 circle
with a 0.150 keep out area. This keep out area is approaching the size of
flash memories, micro BGA's, 0402 chips, etc.
Has anyone figured out a way to work around this local fiducial problem? Is
anyone grouping these parts into some kind of symmetric clusters? Any
ideas?
Jim Kittel
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|