Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 4 Oct 2000 13:50:18 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Basically the rules are this:
If a solder ball is loose (001 term) it is not encapsulated, entrapped or
attached to a metal surface (610 terms). In both documents, this is a defect
for all classes.
If there are more that 5 solder balls that are <.13mm in diameter, within a
600 mm2 area, this is a process indicator for classes 2 and 3 (per 610, not
covered in 001).
If a solder ball is entrapped or encapsulated and is withing 0.13mm from a
land or conductor, and does not violate minimum electrical clearance, this
is a process indicator for classes 2 and 3 (per 610, not covered in 001).
If a solder ball is >.13mm in diameter and is entrapped or encapsulated it
is a process indicator for classes 2 and 3 (per 610, not covered in 001).
Any solder ball violating minimum electrical clearance is a defect for all
three classes in both documents.
Anything else (e.g. a solderball <.13mm that is encapsulated and >.13mm from
any conductor) is acceptable.
Hope this helps.
Mary Muller
> ----------
> From: Steve Kelly[SMTP:[log in to unmask]]
> Reply To: TechNet E-Mail Forum.;Steve Kelly
> Sent: Wednesday, October 04, 2000 12:47 PM
> To: [log in to unmask]
> Subject: [TN] FW: IPC-610C & J-STD-001C
>
> -----Original Message-----
> From: Steve Kelly [mailto:[log in to unmask]]
> Sent: Wednesday, October 04, 2000 3:32 PM
> To: [log in to unmask]
> Subject: IPC-610C & J-STD-001C
>
> When both documents are called up on a drawing how does one interpret the
> solder ball issue. Section 6.5.3.1 in IPC-610C says 5 solder balls per
> .093
> sq.in. as a process indicator. but the next paragraph says a defect is
> present if the solder ball is not attached to a metal surface. I have
> trouble interpreting J-STD-001C but I think I read zero solder balls.
> Thanks
> for the help.
>
> Steve Kelly
> PFC Flexible Circuits Ltd.
> (416) 750-8433
> [log in to unmask]
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|