TECHNET Archives

October 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Grosso, John" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 4 Oct 2000 11:30:25 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (69 lines)
Ed,

I'd suggest you go to the following web site:
http://www.plasticsusa.com/cpvc.html and request testing methodology for
CPVC versus PVC. The specifications for both are listed on this site.

Regards,

John

John S. Grosso
Vice President of Engineering & Technology
4500 South Laburnum Avenue
Richmond, VA  23231
(804)226-5117 Office
(804)226-6025 Fax
[log in to unmask]

> -----Original Message-----
> From: Ed Popielarski [SMTP:[log in to unmask]]
> Sent: Wednesday, October 04, 2000 10:52 AM
> To:   [log in to unmask]
> Subject:      [TN] CPVC vs. PVC
>
> My turn to ask for some assistance:
>
> I need a simple, reliable test to determine if a piece of material is CPVC
> as opposed to PVC.
>
> I bought material from a "reputable" source (although the salesperson was
> a bit ditzy) to fab a replacement part exposed to 150 deg F at 60 PSI
> (aqueous cleaner) and the part failed due to deformation.
>
> I don't want to redo this over and over. If I can determine the
> composition is not CPVC, I'd remake it in the correct material, but if it
> truly is CPVC, I'll have to bite the bullet and build it in $tainle$$
> $teel.
>
> Any help would be greatly appreciated!
>
> Regards,
>
> Ed Popielarski
> QTA Machine
> 10 Mc Laren, Ste. D
> Irvine, Ca. 92618
>
> Ph: 949-581-6601
> Fx: 949-581-2448
>
> <http://www.qta.net>
>
> Check out our BGA Baller and Process Equipment Services!
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2