TECHNET Archives

October 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Kasprzak, Bill (esd) USX" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 3 Oct 2000 09:07:42 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (36 lines)
Good Morning:

I am curious to know if there is a "right" way for the following:

Standard .062 thick, two sided board where turret terminals are mounted. The
boards are being soldered to NASA-STD-8739.3.

The active circuitry is on one side of the board. (on the side that the
terminal is swaged).

For the turret terminal locations only....

Does the "correct" board design call for a pad on one side of the board
without a plated thru hole and no topside pad?

Or.... Can you have a standard plated thru hole when mounting terminals?

Any and all responses appreciated !

Bill Kasprzak
Moog Inc.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2