Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 18 Oct 2000 15:49:45 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Jim,
Is this housing going to be seen by your customer? Would the nickel plating
be punctured or chipped off by an engraving pencil?
regards,
Bev Christian
-----Original Message-----
From: Marsico, James [mailto:[log in to unmask]]
Sent: Wednesday, October 18, 2000 3:23 PM
To: [log in to unmask]
Subject: [TN] INK MARKING
Having trouble ink marking (epoxy ink) on nickel plated housings. Marking
comes off during in-line aqueous cleaning process. Any suggestions?
Thanks,
Jim M.
----------------------------------------------------------------------------
-----
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|