TECHNET Archives

October 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Backplane Press Fit Connector specification
From:
"David P. Bowers" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 18 Oct 2000 14:10:04 +0200
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
Hi All,

I have ordered copies of the IPC backplane standards but unfortunately they
have not yet arrived.

I need to know what the specification for Press fit connectors are in terms
of how much the connector is allowed to be raised off the PCB.

I have been told the industry standard is 0.25mm but I need conformation of
what IPC states and the IPC number which this is mentioned in.

Any help would be greatly appreciated.

Thanks
David Bowers

---------------------------------------------------------------------------------
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2