IPC-A-610 provides acceptablity guidelines, it is a book detailing
acceptance critera.
J-STD-001 is a process control document, it is acutally a series of books
that provide information about electronic manufacturing processes, methods,
materials, and results.

Call out the A-610 if you want to specify results.

 Guy Ramsey
American Competitiveness Institute
Senior Lab Technician / Instructor
610 362-1200 ext 107


-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Nancy Trumbull
Sent: Thursday, October 12, 2000 7:24 AM
To: [log in to unmask]
Subject: Re: [TN] IPC-A-610 and ANSI-J-STD


Good Morning Ken,

I have been told that the ANSI-J-STD is some what the mother book.
 IPC-A -610 is a very good pictorial reference. If you can not find it there
go to your ANSI-J-STD. My understanding is that they are the same only
ANSI-J-STD has more detail and less pictures.
Confusing than my answer is.
I  call out IPC-610 than I go to the J-STD if I can't fine what I need. I
think 610 is easier for our associates to understand.  They have the J-STD
but,  I'm usually the only one that needs it.
Nancy T.

>>> [log in to unmask] 10/11/00 02:19PM >>>
What is the difference between IPC-A-610 and ANSI-J-STD? Which one should I
call out?

re,
ken patel

----------------------------------------------------------------------------
-----
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

----------------------------------------------------------------------------
-----
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------