Phil -

If space permits, we always put a "+" positive symbol for the anode end of
the diode on the outside of the component outline, so it can be seen after
the diode is placed and reflowed. Ed/

Ed Valentine
Electronics Manufacturing Solutions
8612 Mourning Dove Road, Raleigh, NC 27615
Phone: (919) 270-5145, Fax: (919) 847-9971
Email: [log in to unmask]
Website: http://www.ems-consulting.com

----- Original Message -----
From: "Phil Bavaro" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, October 11, 2000 11:38 AM
Subject: [TN] Diode Polarity silkscreen markings


> What does everyone use for marking polarity of diodes on the silkscreen?
>
> Is there a standard for this family of components?
>
> --------------------------------------------------------------------------
-------
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF TECHNET
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------

---------------------------------------------------------------------------------
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------