-----Original Message-----
From: Steve Kelly [mailto:[log in to unmask]]
Sent: Wednesday, October 04, 2000 3:32 PM
To: [log in to unmask]
Subject: IPC-610C & J-STD-001C
When both documents are called up on a drawing how does one interpret the
solder ball issue. Section 6.5.3.1 in IPC-610C says 5 solder balls per .093
sq.in. as a process indicator. but the next paragraph says a defect is
present if the solder ball is not attached to a metal surface. I have
trouble interpreting J-STD-001C but I think I read zero solder balls. Thanks
for the help.
Steve Kelly
PFC Flexible Circuits Ltd.
(416) 750-8433
[log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################