Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 3 Oct 2000 16:32:18 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I am in a similar situation with the exception that we use a standard wave
soldering process. Any help would be appreciated.
Richard Hawkins
[log in to unmask]
> -----Original Message-----
> From: Park Matthew [SMTP:[log in to unmask]]
> Sent: Tuesday, October 03, 2000 12:00 PM
> To: [log in to unmask]
> Subject: [TN] traces under chip components
>
> We want to place traces under 1206, 805 and low-profile SOT23 components.
> We are currently doing that for some designs and desginers are pushing for
> it even further. I am against placing traces under these components
> because
> of greater potential for causing tomstoning, shorting possibilities, and
> not
> being a robust design. What are your thoughts for this? Is there any
> data
> or studies done to show it is ok or not ok to run traces under chip
> components.
>
> We ran a typical SMT process with LPI solder mask, water-soluble and
> no-clean (very soon) and reflowed using convection ovens.
>
> thanks
> Matthew S. Park
> Sr. Process Engineer
> Phoenix International Inc. Fargo, ND.
> Tel: 701-282-9364, ext 434
> Fax: 701-282-9365
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|