Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 11 Oct 2000 15:38:06 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
To state it simply, I believe the J-STD is employed during the design
effort, with the A-610 for acceptance of the manufacturing effort.
ed
-----Original Message-----
From: Ken Patel [mailto:[log in to unmask]]
Sent: Wednesday, October 11, 2000 2:20 PM
To: [log in to unmask]
Subject: [TN] IPC-A-610 and ANSI-J-STD
What is the difference between IPC-A-610 and ANSI-J-STD? Which one should I
call out?
re,
ken patel
----------------------------------------------------------------------------
-----
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF TECHNET
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|