TECHNET Archives

September 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Tracy Black <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 27 Sep 2000 14:06:31 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (31 lines)
Clean rooms fall into different classes, based on the size of the allowable
contaminant.  For example; if memory serves a class 10 clean room would
only allow contaminants that are less than 0.1 micron in spherical size.
Then a class 100 would only allow particles that are less than 0.01
microns.  It would also depend on the weather you are trying filet out dust
contaminants or biological contaminants also.  Usually for biological
contaminants you always use a minimum of 0.25" WG and a Heppa filtration
type system.  As far as the air handler goes you will need a handler that
can handle the back pressure of the filtration system, you actually need a
unit that is designed for it so that you do not waste energy with excessive
back pressure.  Also, the room must have a pressurized airlock that will
not allow contaminants to flow into the clean room.

You would be best served by a Liebert type system, that maintains total
environmental quality.  Especially if you are making a precision piece of
electronic equipment.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2