TECHNET Archives

September 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Roberts Jon <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 27 Sep 2000 14:00:06 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (49 lines)
Also if hand soldering the "G" will not be as noticeable since the part
termination will be down against the pads. With solder paste being applied
first and the part placed on top a "G" will be more noticeable.   Jon

 -----Original Message-----
From:   Sira Rikulsurakan [mailto:[log in to unmask]]
Sent:   Wednesday, September 27, 2000 9:05 AM
To:     [log in to unmask]
Subject:        [TN] Wetted Fillet

Dear Technetors.
     Can anyone please explain me the definition of "Wetted Fillet"
mentioned in
chapter 12 of IPC-A-610C.
For example
          Solder Thickness (Dimension G).
          Acceptable Class 1,2,3 = Properly wetted fillet evident.
Thanks
Mark.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2