TECHNET Archives

September 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jean-Francois Bissonnette <[log in to unmask]>
Reply To:
Date:
Mon, 25 Sep 2000 09:23:38 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (28 lines)
Hello Technetters,

Is there a modification to be made to a 0.031" hole for a lead of
0.018" if the board thickness is 0.125"?  I've been told that
some board we assemble continuously have to be reworked, these seem
to have solderability problem.  Some claim the board thickness may
be related to our problems.

Any information would be appreciated.

Thank You!

JF

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2