Waleed,

Finished thickness could apply to the completed, fabricated board, i.e. .062", it may
also apply to the finished copper thickness, i.e. 1ounce finished, meaning the
fabricator may begin with 1/2ounce copper foil and plate up to a 1ounce finish.

As for a good fabricator, did I mention I'm with Network Circuits, Inc....

Franklin D Asbell
Network Circuits, Inc.
Irving, Texas 75061
www.networkcircuits.com


Waleed Abdel-Hameed wrote:

>         Dear all:
>                    What's a finished thickness.I need to make a RFQ any one
> know a good pcb fab.
>         Thank's
>         waleed
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################