TECHNET Archives

September 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Phil Nutting <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 13 Sep 2000 08:51:48 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (62 lines)
Ken,

This shouldn't be a problem if the board has a solder mask.  Having said
that there are probably 5 or 6 good reasons why you shouldn't allow it.

A lot depends on the final application.

Regards,

Phil Nutting
Manufacturing Engineer
Kaiser Systems, Inc.

-----Original Message-----
From: Ken Patel [mailto:[log in to unmask]]
Sent: Tuesday, September 12, 2000 9:21 PM
To: [log in to unmask]
Subject: [TN] Axial Cap's lead resting on the board...


Guys,
Do you see any problem in having axial PTH capacitor's leads lying on the
board surface? I have a board with cut out in it
and has two holes across the cut out. Bec' of the height restriction on the
board, we want this axial cap's leads rest on the board leaving body hanging
in the air across the thickness.

I hope you are getting the picture here. Please let me know if you see any
problem or I should be aware off.

re,
ken patel

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2