Sender: |
|
X-To: |
|
Date: |
Wed, 6 Sep 2000 14:34:28 -0400 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
<EB8B11E11475D411A8F30000EE496589127E34@BDXSRV09> |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Walter Horaud,
For information on BGA's solder masks design rules, I suggest you hit the
following websites:
Amkor:
http://www.amkor.com/customer_center/assembly_and_test/white_papers/index.ht
m
TI: TMS320C6000 BGA Manufacturing Considerations (PDF: 84 KB) (You'll have
to get to TI's website)
Motorola:
http://www.mot-sps.com/cgi-bin/get.pl?/books/apnotes/pdf/an1231*.pdf
In reviewing these documents, they are pretty consistent with Steve
Gregory's reference.
Good Luck
Lee Whiteman
Senior Manufacturing Engineer
ACI / EMPF
Telephone: (610) 362-1200; Ext. 208
FAX: (610) 362-1290
E-Mail: [log in to unmask] <mailto:[log in to unmask]>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Horaud, Walter
> Sent: Wednesday, September 06, 2000 12:43 PM
> To: [log in to unmask]
> Subject: [TN] Solder mask problems
>
>
> Thechneters,
>
> I'd like to know if there are special design rules for the solder mask on
> PCB.
> Most of PCBs I have seen have pads surrended with a gap and solder mask.
> In our case I have got a PCB with solder mask on the periphery of BGA pads
> (to prevent bridging according to the customer).
> It seems to me that the solder mask on the periphery of pads is not so
> efficient as expected to prevent bridging and it seems to be also
> responsible of the poor mechanical properties of the joint.
> Does anybody have experience with this weird technique (solder mask on the
> periphery of pads)?
>
> Thanks in advance,
>
>
> Walter Horaud
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|