Content-Type: |
text/plain |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 28 Sep 2000 08:42:21 -0500 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
James,
I performed a similar feat at a prior job incarnation. We manufactured very
thin (.008") teflon rf boards. The previous method of assembly was to mount
the bare board to it's fixture. The fixture was aluminum and a HUGE heat
sink. The built assy was ran through an IR oven at gargantuan temps
(450-500C) to overcome the sinking. My first fix was to machine blank pieces
of FR4 to the depth of the of the board and securing with a window pane
style top piece. The FR4 would deform immensely after 2 or so runs, so I
procured some fo the now "outlawed" Arlon 35N ( I think that was the
material). This gave me more runs per panel. I purchased 6 3'x6' panels, so
that gave me 72 pieces. I panelized the boards at around 12 per panel. This
worked like gangbusters and I was able to run the panels through our dinky
Heller 4 zone oven (I've always hated IR anyway). Hope this helps.
Jason Gregory
Manufacturing Supervisor
ACT Manufacturing
Corinth, MS. 38834
(662)287-3771 x470
[log in to unmask]
> -----Original Message-----
> From: Marsico, James [SMTP:[log in to unmask]]
> Sent: Thursday, September 28, 2000 6:57 AM
> To: [log in to unmask]
> Subject: [TN] DENSE ASSEMBLY (PART II)
>
> I want to thank those who responded to my request for suggestions
> regarding
> the assembly of my dense board. If you recall, it is 6002 Duroid, .005"
> thick, 1.5" x 2", with 270 0402s on it. The direction I'm leading to is
> to
> panelize the boards (6" x 9"). The panel will be placed on a solid plate
> (.050"?) and held in place with another plate (window frame) on top. This
> would allow me to go through pick & place and reflow by handling the
> fixture
> only. How does this approach sound? Would you suggest the fixture be
> made
> of stainless steel or should I consider a more thermally stable material
> like graphite?
>
> Second question... This assembly is being used for a high frequency RF
> application, so solder coating the boards will effect performance. (Just
> try and HASL this board!) The RF guys like bare copper, gold, silver,
> maybe
> even nickel or tin plating. Does anyone have any recommendations
> regarding
> surface finish for this assembly? (from a board fabrication and assembly
> process perspective... I'll deal with the RF guys).
>
> Thanks again,
> Jim M.
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8d
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|