TECHNET Archives

August 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Press Pin Lead Protrusion
From:
"Spaulding, Stephen" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 7 Aug 2000 13:33:31 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
Hello.
Can anyone tell me if there are any requirements documented for lead
protrusion of press pins.  If none is required how is visual inspection
completed to verify that a lead did not curl/bend beneath the body
especially on 6 & 8 row VHDM connectors.
Thanks
Steve Spaulding
Compaq Computer Corp.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2