TECHNET Archives

August 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Another ESD question
From:
[log in to unmask]
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 28 Aug 2000 08:41:18 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
How do you folks feel about using compressed nitrogen to dry printed circuit
boards? One of our customers will not allow aqueous cleaning of their hardware.
As a result we clean all of their hardware in alcohol and dry by blowing it off
with compressed nitrogen with the regulator at about 100 PSI. The nozzle is
grounded at the tip. Please note that this is not related to my earlier quetion
as this is done in a different area and only used on our space flight hardware.
Thanks again,
Charles Caswell

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2