TECHNET Archives

August 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Lou Hart <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 2 Aug 2000 17:19:45 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (50 lines)
Steve, from what I've seen, when you consider set up time, changing boards, inspecting, 8 seconds does not seem to be overly conservative.  Lou Hart

----------
From:   Stephen R. Gregory[SMTP:[log in to unmask]]
Sent:   Wednesday, August 02, 2000 4:55 PM
To:     [log in to unmask]
Subject:        [TN] Hand Loading Rates...

Hi all!

I'm trying to come with a good "guestimate" of how many components per hour
an operator should be able to stuff in a board using a Contact CS400. Contact
says their machine has a cycle rate of 1500 per hour (for 3" table moves). I
know it's going to be component and board dependant, how aggressive the
operator is, etc.. I do however think that 1500 components an hour is a
"little" outside realm of most humans.

I'm thinking maybe 5-8 seconds per component depending on what it is...does
that sound reasonable?

-Steve Gregory-

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2