Hello all,

I would like to ask for suggestions as to what would
be a good x-ray system.  I am looking for something
with verical clearance as I have some larger
assemblies however, I am not looking for a system to
be used for a 100% inspection.  It would be more of a
repair verify.  This application does not really call
for a 5 axis machine but you never know...

Inspection of what you ask? Well, the usual; BGAs,
barrel fill, etc.  I apologize if this question seems
rather vague (or broad) and I am sure it will raise
more questions regarding the most likely application.
This is the best that I can do at this time.  I can
say that I have been looking at some smaller units
(not benchtop units as they are too small or built for
a lab environment).

I thank all for taking the time to read.

Kindest regards,
Mark W

_______________________________________________________
Do You Yahoo!?
Get your free @yahoo.ca address at http://mail.yahoo.ca

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################