Sender: |
|
X-To: |
|
Date: |
Sat, 19 Aug 2000 10:34:28 +0300 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=us-ascii |
From: |
|
Parts/Attachments: |
|
|
Mike
The best one I've come across is a triply envelope: a very thin unplasticised
polypropylene on the inside (to provide heat-sealing without evaporating contaminants
onto the contents, like PE does); the middle one is a thin Sendzimir-rolled aluminium
foil (to provide perfect barrier for moisture and chemical contaminants: do NOT use
evaporated aluminium) and a thicker polyethylene layer on the outside to make it
robust. Vacuum-sealing a bare PCB in that will give you virtually perfect protection
and conservation. We used these for individually packing m/ls and had no blow-hole and
no solderability problems with just Sealbrite on the copper for years (both guaranteed
for 6 months, provided soldered within 48 hours after opening). This was 30 years or so
ago, when I was in charge of a PC fab shop.
The bags I describe are sometimes used for the long-term conservation of food without
freezing, where cans are otherwise unsuitable or undesirable for whatever reason.
Brian
"Mcmaster, Michael" wrote:
> There's been a lot of talk about baking and packaging boards to avoid
> problems from moisture sorption. Does anybody have any recommended sources
> for moisture barrier packaging for PWBs?
> Mike McMaster
> RF Product Engineer
> Merix Corporation
> Forest Grove OR
> 503-992-4263
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|