Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 28 Aug 2000 18:00:30 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Franklin
Rarely have I seen such an example of blowholing! You should patent your process for
reducing the amount of lead in an assembly :-). Your board has simply absorbed a lot of
moisture. A prebake will mitigate the problem, but prevention is better than cure.
Brian
Franklin D Asbell wrote:
> Help...
>
> A customer has brought a problem to our attention. The yare experiencing
> 'air bubbles' in through holes after wave soldering.
>
> The copper plating in the hole is averaging 1.25 mils, we have not seen
> any compromised hole walls, only bubbles, they even extend up and out of
> the hole next to the component leads.
>
> I have uploaded pictures on our website, any assistance would be
> appreciated.
>
> These boards were fabricated here in Texas 13 months ago, the customer
> did not bake the boards prior to processing. Thanks
>
> You can view these pictures at this link:
> http://www.networkcircuits.com/technical.htm
>
> Franklin D Asbell
> Network Circuits, Inc.
> Irving, Texas 75061
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|