Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 2 Aug 2000 22:32:50 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello
We have six 400C's and we use 5 seconds a part. For most boards this works
fine. Adjust up a little for large boards or boards which will need a lot
of bin changes where the operator will be waiting on either the rotary bins
or on the jit bin.
Stewart Gadd
Prod. Eng Supervisor
Chemigraphic Ltd
At 16:55 02/08/2000 -0400, you wrote:
>Hi all!
>
>I'm trying to come with a good "guestimate" of how many components per hour
>an operator should be able to stuff in a board using a Contact CS400. Contact
>says their machine has a cycle rate of 1500 per hour (for 3" table moves). I
>know it's going to be component and board dependant, how aggressive the
>operator is, etc.. I do however think that 1500 components an hour is a
>"little" outside realm of most humans.
>
>I'm thinking maybe 5-8 seconds per component depending on what it is...does
>that sound reasonable?
>
>-Steve Gregory-
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
>following text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|