Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 16 Aug 2000 14:50:42 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You can consider the following X-Ray Systems, and their respective websites:
Glenbrook Technologies: http://www.glenbrooktech.com/4.html
Nicolet Imaging Systems: http://www.nicimg.com/
Both of these systems can perform the inspection you described. I recommend
that you get some samples and try them before purchasing. These systems can
be used either for 100% inspection, sample plan inspection, or product
verification.
Good Luck.
Lee Whiteman
Senior Manufacturing Engineer
ACI / EMPF
Telephone: (610) 362-1200; Ext. 208
FAX: (610) 362-1290
E-Mail: [log in to unmask] <mailto:[log in to unmask]>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Mark Weckworth
> Sent: Wednesday, August 16, 2000 2:07 PM
> To: [log in to unmask]
> Subject: [TN] X-ray systems
>
>
> I apologize, the last message did not have a subject
> and I know how annoying that can be...
>
> _________________________________
>
>
> Hello all,
>
> I would like to ask for suggestions as to what would
> be a good x-ray system. I am looking for something
> with verical clearance as I have some larger
> assemblies however, I am not looking for a system to
> be used for a 100% inspection. It would be more of a
> repair verify. This application does not really call
> for a 5 axis machine but you never know...
>
> Inspection of what you ask? Well, the usual; BGAs,
> barrel fill, etc. I apologize if this question seems
> rather vague (or broad) and I am sure it will raise
> more questions regarding the most likely application.
> This is the best that I can do at this time. I can
> say that I have been looking at some smaller units
> (not benchtop units as they are too small or built for
> a lab environment).
>
> I thank all for taking the time to read.
>
> Kindest regards,
> Mark W
>
> _______________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.ca address at http://mail.yahoo.ca
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|