Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 10 Aug 2000 22:22:44 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
yes.
At 01:59 PM 8/10/00 EDT, you wrote:
>Hi all!
>
>Been trying to dial a profile in on the wave today with a board that's fairly
>thick, probably around .090", polyimide, all PTH with a fair amount of the
>IC's being ceramic. We use a spray fluxer and a RMA flux.
>
>The first boards have been coming off without the preferred topside fillets
>at a number of locations. I've been playing with the pre-heat, belt speed,
>and even did something that I don't like to do, which was to flux the topside
>of the board.
>All to no avail...I still had quite a few places that didn't have topside
>fillets, and that is something that doesn't go over well here at all.
>
>I started noticing that the places that didn't have topside fillets were at
>the same locations. So I came back to my 'pooter and looked at the gerber for
>the board. What's really weird was that everyplace there's a thermal for a
>pin is where I have no topside fillet??? I thought that thermals were
>supposed to help prevent that from happening? But it's true, every single
>place there is a thermal= no top solder. Has anybody ever seen that before?
>
>-Steve Gregory-
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>If you need assistance - contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|