Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 9 Aug 2000 13:36:53 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Rick,
The 43K is great. The 20% is very high, did you just carbon treat? You must have
almost no organics in there, is the plated copper dull or rough? The holes will come
out great but if the copper is not "pretty" or you cannot strip the photo resist you
may have a problem.
Chuck Brummer
[log in to unmask]
"Howieson, Rick" wrote:
> We run copper plating tests monthly and send these to an independent lab
> for testing. The requirements are Tensile Strength 36,000 psi minimum
> and Elongation 6% minimum. My question to the experts is-- what if our
> readings were high, i.e. 43,000 psi and 20% elongation?
> TIA,
> Rick Howieson
> General Technology Corp.
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|