Content-Type: |
text/plain |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 16 Aug 2000 12:33:25 -0600 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Check out a CRX2000 from C.R.Technology. We just took delivery on one last
month and are real pleased with the resolution and performance with micro
BGA inspection.
Jim Kittel
L-3 Communications
-----Original Message-----
From: Mark Weckworth [SMTP:[log in to unmask]]
Sent: Wednesday, August 16, 2000 12:07 PM
To: [log in to unmask]
Subject: [TN] X-ray systems
I apologize, the last message did not have a subject
and I know how annoying that can be...
_________________________________
Hello all,
I would like to ask for suggestions as to what would
be a good x-ray system. I am looking for something
with verical clearance as I have some larger
assemblies however, I am not looking for a system to
be used for a 100% inspection. It would be more of a
repair verify. This application does not really call
for a 5 axis machine but you never know...
Inspection of what you ask? Well, the usual; BGAs,
barrel fill, etc. I apologize if this question seems
rather vague (or broad) and I am sure it will raise
more questions regarding the most likely application.
This is the best that I can do at this time. I can
say that I have been looking at some smaller units
(not benchtop units as they are too small or built for
a lab environment).
I thank all for taking the time to read.
Kindest regards,
Mark W
_______________________________________________________
Do You Yahoo!?
Get your free @yahoo.ca address at http://mail.yahoo.ca
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV
1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|