Mime-Version: |
1.0 |
Sender: |
|
X-To: |
|
Date: |
Mon, 14 Aug 2000 10:23:46 +0100 |
Reply-To: |
|
Subject: |
|
From: |
|
X-cc: |
|
In-Reply-To: |
<006901c0054c$0dde4de0$25fee33e@thomidesk> |
Content-Type: |
text/plain; charset="us-ascii" |
Parts/Attachments: |
|
|
Thomas,
At 07:29 PM 8/13/00 +0200, you wrote:
> Dear Technetters, we are currently investigating non-woven aramide
>reinforced PI (Poly-Imide) materials for multilayer PWB fabrication. Our
>requirement is light weight and high temperature (150 deg C = 300 deg F)
>environment, further low TCE to reduce thermal expansion mismatch to large
>ceramic components. Formerly we have used metal core multilayer boards,
>but now we need to save weight. Who can give us advice on material
>selection or share experience with manufacturing (selection of core and
>prepreg material) and durability at this high use temperature? Any help
>will be appreciated Best regards, Thomas Ahrens [log in to unmask]
A.E.A. Technology have been working on SiC/Al metal matrix composites for
use as cores in PCBs. These have much lower density than other composite
core materials such as Cu/Invar/Cu, whilst also having low expansion and
high thermal conductivity.
David Whalley
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|