TECHNET Archives

July 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Luis Gallegos <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 31 Jul 2000 07:52:07 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (52 lines)
Good morning Stephen
We have a glue dispenser in line with our process that applies adhesive and
solder paste dots. When  applying solder paste dots we are getting
consistently getting good solder joints .
I hope this help

Luis Gallegos
Sanmina (kenosha)
[log in to unmask] <mailto:[log in to unmask]>
262 947-7700

        -----Original Message-----
        From:   Stephen Thornton [SMTP:[log in to unmask]]
        Sent:   Sunday, July 30, 2000 8:40 PM
        To:     [log in to unmask]
        Subject:        [TN] Wave Solering SOT23

        To All Technetters,
        This question has probably been asked many times but I'll ask the
experts one more time
        Can anyone tell me how to get good solder perfomance when wave
soldering SOT23 packages
        We have tried quite a few different things but cannot seem to get
consistently good joints on a range of different boards and products.
        We have layed out the lans and pads to the IPC recommendations and
tried going larger, smaller and different orientation etc with no major
success.
        Has anyone out there got the key to this one?
        Any suggestions would be appreciated.
        Please reply to the forum so that all can share the wisdom
        Thanks in advance

        Stephen Thornton
        Engineering Manager Tytronics
        12 Circuit Drive Hendon SA 5014
        Telephone: +61 (0)8 8268 5400
        Fax: +61 (0)8 8268 2503

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2