TECHNET Archives

July 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ryan Jennens <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 27 Jul 2000 13:25:24 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (26 lines)
Hey all-

        In an earlier thread, there was some discussion that separating v-scored
boards can cause bending stress that my crack ceramic capacitors that are
too close to the board edge.  If the boards are separated with a "pizza
cutter" style separator, and the blades are perpendicular, where does this
stress come from?  My thinking is that if the pressure is straight down onto
the lower blade, how is board bending created?

-Ryan Jennens
TelGen Corporation

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2