Hi Steve
Theorectically all of the "special" needs for space applications have
been included in the design.  So you should not need to change
anything.

Only bad side is you have to get used to someone (many someones)
looking over your shoulder.  You do your inspections and then several
others reinspect.  There is also much more responsibility placed on
the assembler to ensure that the boards used are good - so that
extra testing is required - usually performed by an outside lab.

Susan Mansilla
Technical Director
Robisan Lab

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################