In a message dated 07/06/2000 5:12:23 PM Central Daylight Time,
[log in to unmask] writes:
> Hi All,
> Can anybody tell me if it is possible to perform double-sided reflow with
> TSOP 28T or 32T components on the bottom-side?
> I could work it out myself if I could only find the component weights!
> The prouct is at the design stage, so I don't have any components I can
> weigh :-(
>
> Thanks in advance!
>
> Justin Braime
> Compuspec Industries Ltd
> Auckland, New Zealand
Hi Justin!
I wouldn't worry about it...they'll do fine. Parts like TSOP's are pretty
light and have enough leads on them to give you the surface tension you'll
need. Just as long as you have a nice smooth running conveyer and the boards
don't bow...
-Steve Gregory-
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################