In a message dated 6/27/00 7:06:10 AM US Eastern Standard Time,
[log in to unmask] writes:

<< One thing to add to Steve's excellent advice: some components (i.e. small
chip capacitors) are very difficult to check on the first product, so it
might be a good idea to verify feeder-setups not only when changing a feeder
during production, but also before the start.
 A bar code system can be a usefull in avoiding reading errors during feeder
verification.
  >>
There are relatively inexpensive systems of software/hardware that do this
function.  I know of a couple, and they work well.

Jon Moore

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################