TECHNET Archives

June 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Cal Driscoll <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 29 Jun 2000 07:26:21 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (71 lines)
Mark-
I am not familiar with Cadstar
The best thing to do is contact Cadstar direct.....Here is information found
via their web page. I had problems finding any Telephone numbers or email on
their web site....this information was found in a press release.

Mark Ashton, Zuken Ltd.,
1500 Aztec West, Almondsbury,
Bristol, BS32 4RF, UK
Tel: +44 1454 207800
Fax: +44 1454 207803
E-mail: [log in to unmask]


-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Mark Holmes
Sent: Thursday, June 29, 2000 6:08 AM
To: [log in to unmask]
Subject: [TN] CADSTAR Placement file


Hi all,

Our manufacturing plant has a pick and place file which I believe was
created using Cadstar. The rotations given for the parts are 0,1,2 and 3.
My questions are: what angles to these numbers correspond to, and is the
rotation clockwise or anti-clock wise? They don't have a bare board to hand
at the moment, so any advice would be most appreciated.

Best regards,

Mark.

Mark Holmes PCB Designer
Helvar Merca Ltd.
Hawley Mill, Hawley Road,
Dartford Kent. DA2 7SY
Tel: 01322 22 22 11
Fax: 01322 282 286
mailto:[log in to unmask]
http://www.helvar.com

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2