What temperatures did you have in mind?  The humidity associated with the
temperature would probably be a major factor rather than the temperature
itself.  The standard you should consult is ANSI/ESD S 20.20-1999.  If the
temperature gets high enough you won't have to worry about ESD.
Al Cash
-----Original Message-----
From: Byrne James (RBAU-KE/MGE3) [mailto:[log in to unmask]]
Sent: Tuesday, June 27, 2000 6:35 PM
To: [log in to unmask]
Subject: [TN] ESD requirements at higher temperatures.


Technetters,
        I was curious about the effect on ESD discharge at elevated
atmospheric temperatures.
        What are the requirements for elevated temperatures, if they are
acceptable, and what standards could assist as a reference tool for future
work.

Thanks for your assistance in advance.

James Byrne

(RBAU/MGE31)

Robert Bosch (Australia) Pty. Ltd.
Telephone: +61 3 9541 7720
Fax: +61 3 9541 3909
E-mail: [log in to unmask]

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################