TECHNET Archives

June 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Chuck Brummer <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 26 Jun 2000 11:22:38 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (42 lines)
Wow,

There appears to be a lot of prepreg, and the same for your resin content.  My
guess is that you had a big CTE in the Z axis.  Your copper elongation hit the
end of its stretch and the copper strength was better than the bond of the pad
to the resin.  The hole is OK so the end  of the pad gets pulled up.

Try to reduce the resin in your construction or use material with a lower CTE.

Chuck Brummer
Acuson
[log in to unmask]

Rajesh Goutham wrote:

> Sorry ,
> I forgot to attach the image.
>
> (See attached file: Pad lift.jpg)
>
> Rajesh
>
>   ------------------------------------------------------------------------
>                       Name: Pad lift.jpg
>    Pad lift.jpg       Type: JPEG Image (image/jpeg)
>                   Encoding: base64
>                Description: JPEG File Interchange

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2