Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 22 Jun 2000 18:25:43 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Bill and All -
Touch up of probe marks and similar is somewhat like self mutilation - it
serves no realistic purpose!!! Probe marks unless done by a "hack and chop
artist" are inconsequential.
No requirement exists, that I am aware of, to touch up the cosmetics
following normal test activities. This type touch up can result in a major
cost increase, as well as a significant reduction in the overall product
reliability, not to mention the probability of human error.
LEAVE IT ALONE.
Regards - Kelly
-----Original Message-----
From: Kasprzak, Bill (esd) USX <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Thursday, June 22, 2000 6:07 AM
Subject: [TN] Solder Touch-up of probe marks
>'Netters:
>
>J-Std-001, class 3. Does anyone know if there is a requirement to touch up
>solder joints on circuit boards that have probe marks on them after board
>testing? To me, the rework would strictly be cosmetic. The solder joints
>were all acceptable prior to test.
>
>Your opinions and answers please.
>
>Thanks,
>
>Bill Kasprzak
>Moog Inc.
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
>the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
>information.
>If you need assistance - contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|