Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 22 Jun 2000 12:29:17 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Paul,
Don't knock my 5-iron, it's my favorite--now my 2-iron, that one I leave in
the garage.
Now, if you quote Dan Quayle, you have to give at least equal time to Bill
Clinton--do YOU know "what the definition if 'is' is"?
The problem with our industry is that after all that down-sizing and
out-sourcing the OEM's no longer have any in-house expertise, the PCB and
assembly vendors work on such tight margins that relatively little 'thinking'
can be afforded--and so things go wrong. Things wind up in
litigation/arbitration, which make lawyers rich (expert witnesses, like me,
somewhat less so), and are generally unsatisfactory as far as really solving
problems is concerned.
Have fun down under!
Werner
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|