At 08:18 PM 6/2/00 -0400, you wrote:
>I just completed a design for ITT Avionics which was RF circuit using
>Allegro.
>This CAD package is the greatest for this, since they have the feature I
>call the electronics xacto knife to trim pads as needed.
>
>
>Orlen Bates, Jr.
>4 Physical Design, Inc.
>Ormond Beach, Fl.
>phone 904 673 3102
>fax      904 673 2013
>cell     904 451 4282
>www.4physicaldesign.com
>
>
>
> -----Original Message-----
>From:   DesignerCouncil [mailto:[log in to unmask]]  On Behalf Of Donna
>Perry
>Sent:   Thursday, June 01, 2000 6:34 PM
>To:     [log in to unmask]
>Subject:        [DC] RF circuit layout
>
>What CAD package is best for RF circuit layout ?
>

Greetings,

I will be away from my e-mail for a few days.
please contact:
[log in to unmask] for any pcb design issues
[log in to unmask] for any other issues

Thanks,



Leonard Toohey
CAD Applications Engineer
Cisco Systems, Inc.
12515 Reasearch Blvd.
Building 4
Austin, Texas 78759-2220
512 378-1227 (direct)
512-378-1251 (fax)
[log in to unmask]