Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 31 May 2000 08:04:11 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi
There are two technical papers concidering this problem:
A Root cause failure mechanism for solder joint integrity of electroless
nickel/immersion gold surface finishes;Nicholas Biunno, Hadco; Presented at
IPC Printed Circuits Expo 1999 and
ITRI Project on electroless nickel/immersion gold joint cracking; Bruce
Houghton, Celestica; Presented at IPC Printed Circuits Expo 1999.
As far as I know, there is no fix.
B.R.
Jarmo Kiiski
> -----Original Message-----
> From: Michael Forrester [SMTP:[log in to unmask]]
> Sent: 30. toukokuuta 2000 19:43
> To: [log in to unmask]
> Subject: [TN] Black nickel barrier problem w/immersion Ni/Ag
>
> On a recent run of Ni/Ag boards (SM & PTH) we had solderability problems,
> especially on the thru-hole components. Upon investigation by the board
> manufacturer,
> it was reported as a black nickel barrier problem. Apparently this is a
> by-product of the immersion gold plating process. What exactly is it,
> what
> causes it, and is there a way
> to prevent it? Is there a way to "fix" a batch of boards with this
> problem?
> Thank you.
>
> Best Regards,
>
> Mike Forrester
> LeCroy Corp.
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|