Subject: | |
From: | |
Reply To: | |
Date: | Tue, 2 May 2000 17:30:06 +0900 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Keach
The following is what appeared on Technet when I replied to Mr. FuJio's
question.
Besides Jonathan's, I had a few auto-replys from other people.
Most of them were about his/her absence at his/her office.
Minsu Lee
-----Original Message-----
From: Jonathan A Noquil [mailto:[log in to unmask]]
Sent: Thursday, March 02, 2000 9:06 AM
To: 이민수 차장 전자 연구소연구2팀
Subject: Re: [TN] DK measurement at 2GHz
Has anyone knows about lead free solder suppliers (High tenp lead free
solders)
Minsu Lee <[log in to unmask]> on 03/02/2000 07:55:47 AM
Please respond to
You can use HP 4291B Impedance/Material Analyzer up to 1.8 Ghz.
It is easy to use and reliable.
The Dk and Df value at 1.8 Ghz is about the same as those at 2 Ghz.
Therefore, I suppose you can do it with 1.8Ghz.
If you have to measure at 2Ghz, then use Dr. Bereskin's method.
The method has been presented at IPC meeting last spring.
Or you can directly contact Dr. Bereskin to do a measurement.
As for his address, please refer to the paper.
Minsu Lee
Manager
R&D #2 Team
Doosan Electro-Materials Co.
> ** Original Subject: [TN] DK measurement at 2GHz
> ** Original Sender: "Kuwako, Fujio(MMS)" <[log in to unmask]>
> ** Original Date: Wed, 1 Mar 2000 09:35:49 +0900 (KST)
-----Original Message-----
Snap..
From: Keach Sasamori [mailto:[log in to unmask]]
Sent: Friday, April 28, 2000 3:24 AM
To: [log in to unmask]
Subject: Re: [TN] Please let me post my opinions/questions/answers without
anyinterruption.
Minu-Lee:
I checked your subscription options on the list, and you are set up the
same as the 7 other people from your company. I did notice little thing that
might make a difference. Your name is registered with English characters as
Minsu Lee on the Listserv, but your name on the e-mail which was sent was
unreadable. Are you using some Korean characters or a plug-in which converts
your name to Korean characters? That might explain why you are having
trouble, the Listserv computer may not recognize you when you try to post.
Can you send me the specific error messages that you get when you try to
post? I can try to figure it out, but I need some more details.
Keach Sasamori
IS Administrator
IPC
2215 Sanders Rd.
Northbrook, IL 60062-6135
Ph: (847) 790-5315
Fax: (847) 509-9798
e-mail: [log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|