TECHNET Archives

May 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Type:
multipart/mixed; boundary="------------4D19DA8C559A48C5F90D8C55"
Sender:
TechNet <[log in to unmask]>
Subject:
Wave Soldering 2512 Resistors
From:
Gary Camac <[log in to unmask]>
Date:
Wed, 24 May 2000 13:58:21 -0500
MIME-Version:
1.0
Organization:
Dickey-john Corp.
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Gary Camac <[log in to unmask]>
Parts/Attachments:
text/plain (367 bytes) , gcamac.vcf (315 bytes) 
Good afternoon,

I have been asked by our PWB layout dept. if they can put a 2512 on the wave soldered side
of an assembly.  I checked the archives to no avail - so here I am.  We have successfully
populated this size part on both sides of double-side reflow PWAs.  I am a little dubious
about wave soldering them.  Am I right or can this be done?

Thanks in advance

Gary Camac

ATOM RSS1 RSS2