TECHNET Archives

April 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Dave Kell <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 6 Apr 2000 14:46:50 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (21 lines)
I am wondering if anyone has a good method of marking rejects on internal layers of PCB's such that they are detectable on the external layers.  We are a flex-circuit manufacturer and this has not been a problem on lower layer counts, but more opaque materials make internal marking hard to detect.  Keep in mind that these rejects are not always opens or shorts, but may be pattern width or spacing violations.

Any help would be appreciated

Dave Kell
Product Assurance

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2