Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 28 Apr 2000 16:38:33 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Phil et al,
The CR units have no trouble with these parts at around 100kv. I used boards
with the parts on them when looking for x-ray units recently. Hope to have
my CR unit next week.
Rick
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Phil Zarrow
Sent: Friday, April 28, 2000 2:14 PM
To: [log in to unmask]
Subject: Re: [TN] I can't X-ray through this BGA!!!
Steve-
This might be a case of "you gets what you pays for" and might be one of the
differences between the low-cost x-ray systems, and the more powerful,
higher
resolution systems, like CR and others. You might try examining the part
with a CR and see what results. We'll stay tuned!
I also think one needs the a resolution of at least 10 microns in order to
determine if voids are in the 20-25% range and I don't think you get that on
a benchtopper.
Regards,
Phil Zarrow
ITM, Inc.
Durham, NH
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|