TECHNET Archives

April 2000

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: [[TN] auto insertion]
From:
"DOUG W.TURNER" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 28 Apr 2000 23:13:26 AMERICA/FORT_WAYNE
Content-Type:
text/plain
Parts/Attachments:
text/plain (52 lines) 
Hi Jason,
  we use a 6241 with 140 heads. Most of the breakage I have see occurs when
the depth stop is too tight. you want the part to stay in the board, should be
slightly loose. 
"Jason Larson, CET" <[log in to unmask]> wrote:
Hi Technet,

This question is for those that are experts in auto insertion,

At what phase of insertion (depth stop setting, lead shear, clinch, Z span)
are you most likely to break a fragile component such as a glass pack diode
or ceramic axial cap.

We use a Universal VCD

Thanks in advance,

Jason

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################


____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2