TECHNET Archives

April 2000

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"McMonagle, Mike" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 4 Apr 2000 12:57:56 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (163 lines)
Mary,
        Thanks for the clarification, we were led to believe that we would
have to take a minimal (~20 hour) recert to be able to train to -610 Rev C.
So I guess I just need to buy the new training materials? I understand that
Rev C instructor materials will be on CD, will there be a way to upgrade my
existing Rev B slide set to either add/remove the appropriate slides or some
trade-in on the CD? Any ideas?

Mike McMonagle
PCBA Process Engineering
Telxon Corporation
(713) 307-2443 Phone
(713) 307-2581 Fax
www.telxon.com

' Innovative Solutions for
Mobile Information and
Wireless Communications'


-----Original Message-----
From: Muller, Mary [mailto:[log in to unmask]]
Sent: Tuesday, April 04, 2000 11:43 AM
To: [log in to unmask]
Subject: Re: [TN] Training expiration


Mike,
IPC-A-610 certifications do not have a revision attached to them. Therefore,
your certification is good until it's expiration (18 months) whether Rev. C
training is out or not. However, those who were certified on IPC-A-610
Revision B will receive certification for two years beginning at the point
that they re-certify to Revision C. Certification will also be two years for
new Class A Instructor candidates trained on the Revision C of the
IPC-A-610.

Current expiration dates are still in effect, except for those granted an
extension by IPC. In other words, the two-year certification period is not
retroactive. This period applies to both the Worker Proficiency and Class A
Instructor training.

Training materials for Revision C will be available for any certified Class
A instructor by June so you don't need to take another course to "recertify
to revision C".

Mary Muller
Chair,
IPC-A-610 Certification Program Technical Review Committee
> ----------
> From:         McMonagle, Mike[SMTP:[log in to unmask]]
> Reply To:     TechNet E-Mail Forum.;McMonagle, Mike
> Sent:         Tuesday, April 04, 2000 8:59 AM
> To:   [log in to unmask]
> Subject:      Re: [TN] Training expiration
>
> Dave,
>         I believe the J-STD-001 (Instructor or Operator) certification is
> currently for 3 years, with the IPC-A-610 Rev B certification being 18
> months. I have just returned from a IPC-A-610 Rev B to Rev C Review
> Seminar
> hosted by Process Sciences Inc and presented by Jennifer Day, co-chair of
> the IPC-A-610 committee. She stated that when the new certification
> program
> comes out for Rev C Instructor/Operator (June?), it will move to a 2 year
> certification. Just my luck, my brand new -610 Rev B Instructor's cert
> will
> have to be re-cert'd to Rev C in a couple of months....
>
> Mike McMonagle
> PCBA Process Engineering
> Telxon Corporation
> (713) 307-2443 Phone
> (713) 307-2581 Fax
> www.telxon.com
>
> ' Innovative Solutions for
> Mobile Information and
> Wireless Communications'
>
>
> -----Original Message-----
> From: David Hipp [mailto:[log in to unmask]]
> Sent: Tuesday, April 04, 2000 9:45 AM
> To: [log in to unmask]
> Subject: [TN] Training expiration
>
>
> This is for the IPC folks
> What was the basis for the 18 month proficiency period for 001 and  610
> training?
> Can we change the time period longer or shorter with documented
> justification?
>
> Regards,
> Dave Hipp
> Woodward Aircraft Engine Systems
> Electrical Production Engineering
> (815) 639-6732
> FAX (815) 639-6040
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following
> text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################

ATOM RSS1 RSS2