Correct indeed ; i think Mike sprang me on my loose terms before ,
(floor jargon; would be a hell of a job to foam a stone hey)
Foamed silicone elastomer should zoom better, yo right
thanks folks

pk

-----Original Message-----
From: Jerry Cupples [mailto:[log in to unmask]]
Sent: Wednesday, 19 April 2000 1:58
To: TechNet E-Mail Forum.; Paul Klasek
Subject: Re: [TN] Foamed Silicon


At 04:04 PM 4/18/00 +1000, Paul Klasek wrote:

>Dear Netties ,
>i'm seriously stuck here ;
>could any of you spare me ANY lead (non Pb) to foamed flexible silicon
>please :
>
>the target is hydrolysis
>(humidity/temperature aging, of foamed polyurethanes for example)
>resistant flexible foam , inject mouldable to curing dies ;
>about 50 grams shot size (a handful, 6"ball)
>
>Technology, equipment, sheet/block fabricators, .......
>
>The foamed silicon lasts for a century ; unlike pu for less than decade .
>
>I realize 'm stretching it here on Net with a bit distant subject ;
>appreciate the help .

Paul, I'm too busy to look right now, but I'll tell you this:

You may be looking for foamed silicone elastomer, but most likely not
"silicon".

Do some web searches on that phrase.


regards,


Jerry Cupples
Interphase Corporation
Dallas, TX USA
http://www.iphase.com

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################