Assuming your actually referring to foamed silicone rather than silicon (I'm
not sure how you would make a foam silicon), we have used one from General
Electric in the past, RTF762. There is a data sheet on their web page at
www.ge.com.

Hope this helps.
Mary Muller
ELDEC Corp.

> ----------
> From:         Phil Crepeau[SMTP:[log in to unmask]]
> Reply To:     TechNet E-Mail Forum.;Phil Crepeau
> Sent:         Tuesday, April 18, 2000 8:18 AM
> To:   [log in to unmask]
> Subject:      Re: [TN] Foamed Silicon
>
> hi,
>
> it seems that the rogers corporation makes silicone foams.  i would also
> check with dow corning.
>
> phil
>
> -----Original Message-----
> From: Paul Klasek [mailto:[log in to unmask]]
> Sent: Monday, April 17, 2000 11:05 PM
> To: [log in to unmask]
> Subject: [TN] Foamed Silicon
>
>
> Dear Netties ,
> i'm seriously stuck here ;
> could any of you spare me ANY lead (non Pb) to foamed flexible silicon
> please :
>
> the target is hydrolysis
> (humidity/temperature aging, of foamed polyurethanes for example)
> resistant flexible foam , inject mouldable to curing dies ;
> about 50 grams shot size (a handful, 6"ball)
>
> Technology, equipment, sheet/block fabricators, .......
>
> The foamed silicon lasts for a century ; unlike pu for less than decade .
>
> I realize 'm stretching it here on Net with a bit distant subject ;
> appreciate the help .
>
> Thanks a lot
>
> Paul Klasek
> http://www.resmed.com
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################